ECUMaster EMU JZZ30 Soarer 1JZGTE PNP Adapter only

New product

ECUMASTER Plug and Play adapter for the JZZ30 1JZ with Manual Transmission (4 rows of pins on the ECU connector) allows for plug and play installation of the EMU, EMU CAN, or EMU Black standalone ECU. All ECUs are sold separately, simply choose the model that best fits your goals and purchase the plug and play adapter for your vehicle.

Adapter cable only. ECUMaster EMU is not included.

More details

USD$250.00

Add to wishlist

Interac or Paypal
Interac or Paypal

More info

ECUMASTER Plug and Play adapter for the JZZ30 1JZ with Manual Transmission (4 rows of pins on the ECU connector) allows for plug and play installation of the EMU, EMU CAN, or EMU Black standalone ECU. All ECUs are sold separately, simply choose the model that best fits your goals and purchase the plug and play adapter for your vehicle.

Common applications for the ECUMaster EMU are modified sports car and racing engines, motorcycles, boats, and stationary engines.

ECUMaster EMU Technical Details

  • 6 Fuel injector outputs (5A) (12 injectors in batch fire)
  • 6 AUX outputs (5A)
  • 6 Ignition outputs -Passive or active coils, software selectable (7A) (supports up to 12 cylinders)
  • 4 stepper motor outputs – bipolar/unipolar (1A)
  • 2 direct EGT input channels
  • 2 knock sensor inputs (supports flat response or resonant sensors)
  • Built-in wideband O2 controller for Bosch LSU 4.2
  • Built-in 4 bar MAP sensor
  • Built-in barometric pressure sensor
  • 4 Digital inputs VR/HALL – software selectable
  • 3 Dedicated analog inputs (TPS, CLT, IAT)
  • 4 Additional analog inputs (0-5V)
  • Compliance with ISO 7637
  • Supports 1-12 cylinders
  • Max RPM 16000
  • Injection time resolution 16us
  • Ignition advance resolution 0.5 deg
  • Knock sensing 1-20 kHz
  • Speed Density, Alpha-N algorithm
  • 16×20 VE fuel table, resolution to 0.1% VE
  • 16×20 Ignition table, resolution to 0.5 deg
  • 16×20 Target AFR table, resolution to 0.1 AFR
  • Injector voltage compensation
  • Coil dwell calibration
  • User calibrated IAT, CLT
  • PID idle control strategy
  • PID Boost Control, advanced strategies: per gear, per speed
  • Nitrous control with fuel and ignition modification tables
  • Aux outputs for fuel pumps, radiator fans, etc.
  • Motorsports features: launch control, gear dependent shift light,  flat shift ( gear change cut)
  • Logging available for over 100 parameters
  • Check engine light output
  • Full Flex Fuel capability with map blending (requires ethanol content sensor)
  • Advanced features available with additional modules: Drive By Wire throttle, Bluetooth adapter for using an Android device to display gauges
  • USB communication, no additional interface needed, uses standard USB cable (included)
  • The ECUMaster EMU comes with user friendly software with free firmware upgrades
  • 24 month warranty

 

PC Requirements

  • Windows 2000, XP, Vista, Windows 7, Windows 8
  • Screen resolution of at least 1024×768 16bit
  • CPU with a clock of at least 600MHz
  • USB port

What’s in the box
-  JZZ30 Soarer 1JZGTE PNP Adapter

Reviews

Write a review

ECUMaster EMU JZZ30 Soarer 1JZGTE PNP Adapter only

ECUMaster EMU JZZ30 Soarer 1JZGTE PNP Adapter only

ECUMASTER Plug and Play adapter for the JZZ30 1JZ with Manual Transmission (4 rows of pins on the ECU connector) allows for plug and play installation of the EMU, EMU CAN, or EMU Black standalone ECU. All ECUs are sold separately, simply choose the model that best fits your goals and purchase the plug and play adapter for your vehicle.

Adapter cable only. ECUMaster EMU is not included.